Wall Sconce | LOOPEZ

The Loopez wall sconce by Sollux Lighting is a matte black steel tube mounted vertically on the wall, finished at the bottom with a chrome, copper or gold ring. It measures 6 cm long, 8 cm wide and 29 cm high, and takes 2 GU10 bulbs that light upward and downward.

A tube wall sconce between matte black and shiny metal

The upper part of the tube, in matte black, blends discreetly into the wall. The lower ring, on the other hand, catches the light and the eye.

This contrast gives this tube wall sconce a refined look, even when switched off. Its slender silhouette recalls a fine piece of metalwork. Its smooth surface can be dusted in an instant.

At just 6 cm long, it remains very slim and fits easily on a narrow section of wall. Its clean lines suit modern, minimalist interiors.

Chrome, copper or gold ring: which finish to choose?

The chrome ring brings a cool, contemporary note, ideal with stainless steel or glass finishes. The copper ring warms the whole and pairs well with dark woods and patinated leather.

The gold ring goes well with velvet and dark walls, which bring out its shine. This black and gold wall sconce gives the wall a touch of elegance.

Choose the finish that matches the handles or frames in the room: the sconce then echoes a detail that is already there. Keep the same ring on all the sconces in a room. In an open space, however, you can assign a different finish to each area.

A double beam upward and downward

The 2 light sources at the ends of the tube project one beam toward the ceiling and another toward the floor. The wall is covered with 2 streaks of light that extend the verticality of the sconce.

This indirect lighting never points at the eyes and creates a soft, muted atmosphere. It enhances a textured wall, a deep paint color or a stone facing.

Mount the sconce so that the 2 beams have room to stretch, both above and below. Also check that the tube is level before tightening.

Where to install this sconce for a hallway or living room?

This hallway wall sconce is installed in a series. It creates a succession of columns of light that give the passage the look of a gallery. Keep an even spacing between the fixtures.

In a living room, several sconces above a long sofa highlight the main wall. In a bedroom, this wall sconce is placed on each side of the headboard and provides a soft light. In a dining room, a pair frames a sideboard or a mirror.

Loopez takes 2 GU10 LED bulbs of 12 W maximum each, not included. The light fixture is rated IP20, so it is intended for dry rooms only. The electrical connection must be carried out by a qualified electrician. For maintenance, switch off the power, then wipe the black tube with a dry cloth and the ring with a soft microfiber cloth.

Frequently asked questions about the Loopez wall sconce

Which bulbs does the Loopez wall sconce need?

2 GU10 LED bulbs of 12 W maximum each. They are not included with the light fixture.

What are its dimensions?

The Loopez wall sconce measures 6 cm long, 8 cm wide and 29 cm high.

Can it be installed in a bathroom?

No. The Loopez wall sconce is rated IP20: it is intended for dry rooms only.

What material is it made of?

It is made of steel painted matte black, with a shiny ring.

What finishes does it come in?

The Loopez wall sconce comes with a chrome, copper or gold ring.